Editing Videos With Claude: 4 Audio Mistakes and How to Fix Them
Audio gets worse in videos edited with Claude because Claude works algorithmically and does not listen like a sound engineer. Giorgio Terenziani of ERMETHE, a professional musician and marketer, shows four recurring mistakes and what to ask Claude to avoid them, with just a few extra minutes of work.
Video in Italian with English subtitles.
Key takeaways
- Claude does not look at waveforms like an editor: it applies mathematical rules, precise but not very smart, so it needs to be guided.
- Instead of asking for dozens of changes, it is better to read the transcript and point out, by the second, the spots it should not touch.
- Voice and effects go on two separate tracks, otherwise the compressor crushes the voice and the sound becomes muffled.
- The type of microphone and the distance must be stated: they change the proximity, and with compression the voice becomes sibilant.
- An expensive microphone is not enough: with some audio basics and 3-5 extra minutes, the result becomes professional.
Claude's 4 audio mistakes and what to ask it
| Mistake | Why it happens | What to ask |
|---|---|---|
| Double consonants and pauses get cut | In a double consonant there is a brief silence and Claude removes it, just as it shortens pauses | Using the transcript, point out the seconds with double consonants and ask for more milliseconds between words |
| Volume drops on B and P | Plosives have peaks and Claude tends to compress them | Flag those spots and ask it not to compress them |
| Voice and effects crushed | On a single track the compressor acts on everything | Ask for two separate tracks, one for the voice and one for the effects |
| Sibilant voice | Compression pushes on the upper mids and the distance from the microphone changes the sound | State which microphone you use and how far you speak from it |
Learn more: How to edit videos with Claude (in Italian)
Video transcript (translated from Italian)
Everybody is editing videos with Claude, and a lot of people complain about the audio. Now I'll tell you how to get Claude to do the job, because you need to understand that Claude is not an editor who looks at the waveforms and says: here there's silence, here the word is quieter, so let's raise it. It works on an algorithmic, mathematical level, so it's very precise but not very smart. An algorithm is not a heuristic.
So, first thing: in Italian there are double consonants, and some provinces also pronounce other words, like "bello," with a double one. In a double there's a silence: if you tell it to remove the silences or to watch out for silences, it turns your doubles into non-doubles. Also, many letters are plosives, the b, the p: these have a big peak. Claude tends to compress, it uses loops generally. So what happens is that when you say a double consonant, the audio drops.
The other thing, then, is to look for skills or tools connected via MCP to clean up the silences, or you get a transcript made. So you upload your video. The idea is not to rush, that alone speeds you up a lot: you need to spend a minute? Spend five. Good, you upload, you read the transcript, you say: look, at second 37 there are the words with double consonants, you point them out: don't cut them.
It also tends to cut off words too early, and some silences. For example, every now and then when I talk I make this kind of look, so you have to tell it not to cut those pauses, you tell it by watching the video yourself, or you tell it to leave more milliseconds between one word and the next.
The other thing is if you use effects. It happened on a video I made in recent days, where there was fire, and you hear everything together. Why? Because you have to tell it to make two tracks, otherwise it makes just one, meaning the voice track is placed on top of the effect, the volume is higher, the compressor kicks in, it crushes it, everything gets muffled this way, you lose the highs and it all sounds rounded.
This is just one example, then technically there are lots of small things you can do. I, for example, am using this microphone: sometimes, when it's working with a good microphone, it tends to compress, everything gets sibilant, because compression squashes toward the upper mids. So when I record with the microphone I have to say: careful, I'm using a microphone of this type, at this distance. I check where the tilt is, it's not even optimal today. Many of you do it this way: if you move it, the proximity changes, and so you can hear that "double, double, double" changes.
So the idea is to work on it a bit, have some audio basics, try to manage it as well as possible, and at that point let it do the work. It takes 3, 4, 5 minutes to get truly professional, great audio. Even if you use a mega microphone, even if it were a Neumann worth 5,000 euros, it doesn't matter: it doesn't edit like a musician, like a sound engineer, but like software, which is what it is. So take these tricks and make better audio.
Original transcript in Italian
Tutti che montano i video con Claude e tanti che si lamentano dell'audio. Adesso ti dico come far fare a Claude il lavoro, perché devi capire che Claude non è un editor che guarda le waveform e dice: qua c'è il silenzio, qui la parola è più bassa, quindi l'alziamo. Lavora a livello algoritmico, a livello matematico, quindi molto preciso ma poco intelligente. Algoritmo diverso da euristica.
Quindi, prima cosa: in italiano ci sono le doppie, alcune province pronunciano anche altre parole, come bello, con una doppia. Nella doppia c'è un silenzio: se tu gli dici di togliere i silenzi o di stare attenti ai silenzi, lui ti fa le doppie non più doppie. In più molte lettere sono plosive, la b, la p: queste hanno un grande picco. Claude tende a comprimere, usa i loops generalmente. Quindi succede che quando tu dici che hai fatto una doppia, l'audio va giù.
L'altra cosa, quindi, è quella di cercare delle skill o dei tool attaccati in MCP per pulire i silenzi, oppure vai a farti fare una trascrizione. Quindi tu carichi il tuo video. Il concetto è non avere fretta, già quello ti accelera molto: devi metterci un minuto? Mettici cinque. Bene, carichi, leggi la trascrizione, dici: guarda, al secondo 37 ci sono le parole con le doppie, li indichi, non tagliarle.
Tende anche a chiudere troppo presto le parole e alcuni silenzi. Per esempio io ogni tanto, quando parlo, faccio tipo questo sguardo: allora gli devi dire di non tagliare quelle pause, glielo dici riguardando tu il video, oppure gli dici di lasciare più millisecondi tra una parola e l'altra.
L'altra cosa è se usi effetti. È capitato su un video che ho fatto nei giorni scorsi, dove c'era il fuoco, e senti tutto insieme. Perché? Perché devi dirgli di fare due tracce, altrimenti lui ne mette una, cioè la prima traccia di voce viene inserita sopra l'effetto, il volume è più alto, il compressore agisce, te lo schiaccia, diventa tutto intubato, in questo modo perdi le alte e gira tutto in tondo.
Questo è solo un esempio, poi tecnicamente ci sono tante piccole cose che si possono fare. Io per esempio sto usando questo microfono: delle volte, quando lui ha un microfono buono, tende a comprimere, diventa tutto sibilante, perché nella compressione schiaccia verso la medio alta. Allora quando registro col microfono devo dire: attento, sto usando un microfono di questo tipo, a questa distanza. Guardo dov'è l'inclinazione, manco è ottimale oggi. Tanti di voi lo fanno in questo modo: se lo muovi cambia la prossimità, e quindi puoi sentire che «doppia, doppia, doppia» cambia.
Quindi il concetto è lavorarci un po', avere qualche nozione audio, cercare di gestirla al meglio e a quel punto far fare lui il lavoro: bastano 3, 4, 5 minuti per avere audio veramente professionali e belli. Anche se usate un mega microfono, anche se fosse un Neumann da 5.000 euro, non importa: lui non edita come un musicista, come un sound engineer, ma come un software, quale è. Quindi prendete un po' questi trick e fate audio migliore.


